Polycap TC™囊式组织培养溶液过滤器

简要描述：Polycap TC/PES,带滤罩或不带滤罩两种，是双层聚醚砜膜（PES）膜的一次性囊式过滤器，有效过滤重要水溶液。 PES膜亲水性、低提取物、生物安全性，有的流速和极低的蛋白吸附力Polycap TC/PES,带滤罩或不带滤罩两种，是双层聚醚砜膜（PES）膜的一次性囊式过滤器，有效过滤重要水溶液。 PES膜亲水性、低提取物、生物安全性，有的流速和极低的蛋白吸附力

产品型号： 6714-3602

所属分类：Whatman滤膜滤筒滤器

更新时间：2023-11-19

联系我们 在线咨询

特性和优点

*polycap TC/PES 0.1,0.2和0.8μm/0.2μm囊式滤器通过了HIMA严格测试，是灭菌级滤器

*在生产中100%进行完整性测试，结果和微生物截留有关

*外壳热融合而成（没有表面活性剂或模具释放剂）

*完整性测试包括起泡点、压力衰减或向前流动方法等

*有已灭菌的和未灭菌两种选择，带与不带滤罩

*ISO质量体系下在绝对清洁的室内环境下生产

*PES膜蛋白吸附特性

 HAS 0.4μg/cm2

胰岛素2.0μg/cm2

丙种球蛋白1.5μg/cm2

应用

*水溶液                  *酵素                  *试剂制备

*生物学                  *高质水              *盐溶液

*液                  *颗粒计数液      *组织培养基

*清洁/冲洗液体     *药物激体          *细菌悬浮液

技术参数-polycap TC囊式组织培养也过滤器

外壳                                     polypropylene

通气口                                 on inlet

膜                                         polyethersulfone(PES)

支撑物                                 polypropylene

密封口                                 heat-fused

最大压力                             60 psi(4.1bar)

流向                                     if there is a prefilter,it is located on the inlet side and flow should follow arrows

无焦化                                 LAL tested,non-reactive

生物安全                             materials pass USP class VI

消毒                                     certain filter devices have been sterilized.*they may be autoclaved once at a minimum of 121℃ for 20 minutes (132℃ max).however,an integrity test should be performed after autoclaving.­(*sterile and non-sterile option offered)

过滤面积                            36 mm capsule:440 cm2(72 in2)

                                            75 mm capsule:930 cm2(144 in2)

                                            150 mm capsule:1,900 cm2(302 in2)

水泡点                                0.1μm>3.2bar(46psi)

                                            0.2μm>2.7bar(40psi)

                                            0.45μm>2.1bar(30psi)

终滤层膜                            1.0μm>1.1bar(16psi)

订货信息- polycap TC囊式组织培养也过滤器

目录号           膜            孔径            接口                               无菌     数量/包

                         （μm）                   进口          出口

polycap 36 TC   

6714-3602       PES        0.2/0.2          SB                SB               是       1 

6717-3602       PES        0.2/0.2          1/2”SB         1/2”SB         是       1

2622NS           PES        0.2/0.2          1/2”HB         SB               是       5

6714-3604       PES        0.65/0.45      SB                SB               是       1

polycap 36 TC with bell

6715-3601       PES        0.2/0.1          SB                SB               是       1

6715-3602       PES        0.2/0.2          SB                SB               是       1

6716-3612       PES        0.2/0.2          1/4”MNPT   SB               是       1

6715-3682       PES        0.8/0.2          SB                SB               是       1

6716-3602       PES        0.2/0.2          MNPT          SB               是       1

6715-3604       PES        0.65/0.45      SB                SB               是       1

polycap 75 TC

6714-7501      PES          0.2/0.1         SB                SB               是       1

6714-7502      PES          0.2/0.2         SB                SB               是       1

2742C             PES          0.2/0.2         1/2”SB         1/2”SB         是       5

2742M            PES          0.2/0.2         1/4”MNPT   1/4”MNPT  是       5

6717-7504      PES          0.65/0.45     1/2”SB         1/2”SB         是       1

6714-7504      PES          0.65/0.45      SB               SB               是       1

6717-7510      PES          1.0/1.0         1/2”SB         1/2”SB         是       1

polycap 75 TC with bell

6715-7501      PES          0.2/0.1         SB                SB                是       1

6715-7502      PES          0.2/0.2         SB                SB                是       1

6715-7582      PES          0.8/0.2         SB                SB                是       1

6718-7504      PES          0.65/0.45     1/2”SB         SB                是       1

polycap 150 TC

6717-9501      PES          0.2/0.1         1/2”SB         1/2”SB                是       1 

6717-9502      PES          0.2/0.2         1/2”SB         1/2”SB                是       1

6704-9502      PES          0.2/0.2         1 1/2”Sanitary  1 1/2”Sanitary  是       5  

6717-9504      PES          0.65/0.45     1/2”SB          1/2”SB               是       1

6717-9510      PES          1.0/1.0         1/2”SB          1/2”SB               是       1

Polycap 150 TC with bell

6718-9502      PES          0.2/0.2        1/2”SB           SB                      是       1

6718-9582      PES          0.8/0.2        1/2”SB           SB                      是       1

1PES-聚醚砜

*SB-梯形适用6-10mm1/4”-3/8”软管

1/2”SB-梯形适用10-12mm3/8”-1/2”软管

MNPT-公式螺纹管

HB-倒钩型